• 콤펙트하고 외부 충격에 강한 외형
• 가변 정방파 펄서를 사용하여 고분해능과 고침투형 필요에 유연하게 세팅
• 작동 중 생파형, 종류 파형 그리고 스캔 바와 함께 표시되는 대형 디지트 등의 화면 선택 기능
• 여러 다양한 싱글 탐촉자 사용
• 16개의 공장 세팅, 48개의 사용자 설정 셋업, 사용자 설정 셋업은 적용점에 따라 편집
• 보고서 작성을 위한 알파벳-숫자 데이터 로거Measurement Modes:
Pulse-Echo (Precision General purpose).
Interface-Echo (Precision - Thick materials).
Echo-Echo (Precision - Thin materials & thru-paint).
Pulser: Square wave pulser with adjustable pulse width (spike, thin, wide).
Receiver: Manual or AGC gain control with 40dB range, depending on mode selected.
Timing: 40 MHz with ultra low power and 8 bit digitizer.
Three 1.5V alkaline or 1.2V NiCad AA cells.
Typically operates for 150 hours on alkaline and 100 hours on NiCad (charger not included.)
Auto power off if idle 5 min.
Battery status meter.
Interface-Echo Mode: Steel 0.05 1.0 in (1.27mm - 25.4mm). Plastics from .005in. (127mm).
Echo-Echo Mode: Steel .006in -.500in (.15mm - 12.7mm).
Pulse-Echo Contact: Steel .040in - 10.0in (1mm - 254mm). Plastics from .010in (.254mm).
Echo-Echo Contact: Steel thru-paint .100in - 3.0in (2.54mm - 76.2mm).
Resolution (selectable): +/- .001in (0.01 mm), or +/- .0001in - (.001mm).
Velocity Range: .0492 to .3936 in./ms 1250 to 9999 meters/sec
Single and Two point calibration option, or selection of basic material types.
Units: English & Metric
A-Scan - Rectified +/- (half wave view) RF (full waveform view)
B-Scan - Time based cross section view. Display speed of 15 seconds per screen.
Large Digits Standard thickness view. Digit Height: 0.400 in (10mm).
Scan Bar Thickness - 6 readings per second. Viewable in B-Scan and Large Digit views.
Repeatability Bar Graph - Bar graph indicates stability of reading.
12,000 readings and waveforms (alpha numeric storage).
OBSTRUCT to indicate inaccessible locations.
Memory: 16 megabit non-volatile ram.
Transducer Types: Single Element (1 to 20 MHz).
Locking quick disconnect “ 00” LEMO connector.
Standard 4 foot long integral cable.
Custom transducer and cable lengths available.
Setups: 16 factory and 48 user-defined setups.
Gates: Single gate in pulse-echo mode.
Single gate with hold-off in interface-echo, echo-echo, and plastics mode. Adjustable threshold.
Multiple Measurement Modes: Selectable modes for use with a variety of applications.
Alarm Mode: Set hi and lo tolerances with audible beeper and visual LEDs.
Fast-Scan Mode: Takes 32 readings per second and displays the minimum reading found when the transducer is removed. Display continuously updates while scanning.
Factory calibration traceable to national standards.
2 year limited