13.5 ounces (with batteries).
2.5 W x 6.5 H x 1.24 D inches
(63.5 W x 165 H x 31.5 D mm).
-14° to 140°F (-10° to 60°C).
Membrane switch with twelve tactile keys.
Extruded aluminum body
with nickel-plated aluminum
end caps (gasket sealed).
Bi-directional RS232 serial port. Windows® PC interface software.
1/8 in. VGA grayscale display
(240 x 160 pixels). Viewable area 2.4 x 1.8 in. (62 x 45.7mm).
EL backlit (on/off/auto).
Pulse-Echo (flaws, pits)
Square wave pulser with adjustable
pulse width (spike, thin, wide).
Manual or AGC gain control with
40dB range, depending on mode
20 MHz with ultra low power
8 bit digitizer.
2 year limited
Three 1.5V alkaline or 1.2V NiCad AA cells.
Typically operates for 150 hours on
alkaline and 100 hours on NiCad
(charger not included.)
Auto power off if idle 5 min.
Battery status icon.
Pulse-Echo Mode: (Pit&Flaw Detection) measures from
0.025 9.999 inches (0.63 to 254
Echo-Echo Mode: Thru Paint &
Coatings) measures from 0.1 to 4.0
inches (2.54 to 102 millimeters).
Range will vary +/- depending on the
thickness of coating.
Resolution: +/- .001 inches (0.01 mm)
.0492 to .3936 in./ms 1250 to 9999 meters/sec
Single and Two point calibration option, or selection of basic material types.
Units: English & Metric
A-Scan Rectified +/- (flaw view) RF (full waveform view)
B-Scan Cross sectional view.
Display speed of 15 secs per screen.
Large Digits Standard thickness
view. Digit Height: 0.400 in (10mm).
Scan Bar 6 readings per second. Viewable in B-Scan and Large Digit views.
Repeatability Bar Graph Bar graph
indicates stability of reading.
12,000 pages of memory (alpha
1 reading and 1 waveform per page.
OBSTRUCT to indicate inaccessible locations.
16 megabit non-volatile ram.
Dual Element (1 to 10 MHz).
Locking quick disconnect “ 00” LEMO connectors.
Standard 4 foot cable.
Custom transducers and cable lengths available for special
64 custom user-definable setups.
Factory setups can also be edited by
Single gate in pulse-echo mode, or single gate with holdoff in echo-echo mode. Adjustable threshold.
Selectable transducer types with built-in dual path error correction for
Set hi and lo tolerances with
audible beeper and visual LEDs.
Takes 32 readings per second and
displays the minimum reading found when the transducer is removed.
Basic Prove-up flaw detection option using single element angle beam transducers.